Help
rdrreed at cox.net
rdrreed at cox.net
Thu Jun 7 03:04:09 UTC 2007
I have tried twice to burn a Ubuntu 6.06.1 CD using InfraRecorder and have received the following error message. I am new to this and would like to know what I am doing wrong. Any help would be appreciated.
CCore::BurnImage
[1,0,0] LITE-ON COMBO SOHC-4832K OPK3
File = C:\Documents and Settings\HP_Owner\My Documents\UOFA DOWNLOADS\ubuntu-6.06.1-desktop-i386 2nd.iso.
Eject = 0, Simulate = 1, BUP = 1, Pad tracks = 1, Fixate = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> SCSI buffer size: 64512
> Cdrecord-ProDVD-Clone 2.01.01a22 (i686-pc-cygwin) Copyright (C) 1995-2006 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.9'.
> Driveropts: 'burnfree,noforcespeed'
> atapi: -1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'LITE-ON '
> Identifikation : 'COMBO SOHC-4832K'
> Revision : 'OPK3'
> Device seems to be: Generic mmc2 DVD-ROM.
> Current: none
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> FIFO size : 4194304 = 4096 KB
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: Input/Output error. test unit ready: scsi sendcmd: no error
> CDB: 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 200s
> /cygdrive/c/Program Files/InfraRecorder/cdrtools/cdrecord: No disk / Wrong disk!
> Track 01: data 698 MB padsize: 30 KB
> Total size: 802 MB (79:28.01) = 357601 sectors
> Lout start: 802 MB (79:30/01) = 357601 sectors
CCore::ProcessEnded
CCore::BurnImage
[1,0,0] LITE-ON COMBO SOHC-4832K OPK3
File = C:\Documents and Settings\HP_Owner\My Documents\UOFA DOWNLOADS\ubuntu-6.06.1-desktop-i386 2nd.iso.
Eject = 0, Simulate = 1, BUP = 1, Pad tracks = 1, Fixate = 1, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Clone = 0.
> scsidev: '1,0,0'
> scsibus: 1 target: 0 lun: 0
> SCSI buffer size: 64512
> Cdrecord-ProDVD-Clone 2.01.01a22 (i686-pc-cygwin) Copyright (C) 1995-2006 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.9'.
> Driveropts: 'burnfree,noforcespeed'
> atapi: -1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'LITE-ON '
> Identifikation : 'COMBO SOHC-4832K'
> Revision : 'OPK3'
> Device seems to be: Generic mmc2 DVD-ROM.
> Current: CD-R
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R (current)
> Profile: CD-ROM
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1895168 = 1850 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 698 MB padsize: 30 KB
> Total size: 802 MB (79:28.01) = 357601 sectors
> Lout start: 802 MB (79:30/01) = 357601 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Disk Is not unrestricted
> Disk Is not erasable
> Disk sub type: Medium Type B, low Beta category (B-) (4)
> ATIP start of lead in: -11834 (97:24/16)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 24
> Manufacturer: SONY Corporation
> Capacity Blklen/Sparesz. Type
> 449849 2048 No Media Present or Unknown Capacity
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2248
> Forcespeed is OFF.
> Starting to write CD/DVD at speed 48 in dummy SAO mode for single session.
> Last chance to quit, starting dummy write in 5 seconds
> Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Sending CUE sheet...
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
CCore::ProcessEnded
Error: Unable to load ASPI driver, wnaspi32.dll could not be loaded.
Opened device 'E' using SPTI.
CCore2Info::GetTotalDiscCapacity
Current profile: 0x0009.
Capacity list length: 8 bytes.
No media present.
CDiagnostics::DeviceScan
> Using libscg version 'schily-0.9'.
> scsibus0:
> 0,0,0 0) 'ST340015' 'A ' '3.15' Disk
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) HOST ADAPTOR
> scsibus1:
> 1,0,0 100) 'LITE-ON ' 'COMBO SOHC-4832K' 'OPK3' Removable CD-ROM
> 1,1,0 101) *
> 1,2,0 102) *
> 1,3,0 103) *
> 1,4,0 104) *
> 1,5,0 105) *
> 1,6,0 106) *
> 1,7,0 107) HOST ADAPTOR
> scsibus2:
> 2,0,0 200) 'Generic ' 'USB SD Reader ' '1.00' Removable Disk
> 2,1,0 201) *
> 2,2,0 202) *
> 2,3,0 203) *
> 2,4,0 204) *
> 2,5,0 205) *
> 2,6,0 206) *
> 2,7,0 207) HOST ADAPTOR
> scsibus3:
> 3,0,0 300) 'Generic ' 'USB CF Reader ' '1.01' Removable Disk
> 3,1,0 301) *
> 3,2,0 302) *
> 3,3,0 303) *
> 3,4,0 304) *
> 3,5,0 305) *
> 3,6,0 306) *
> 3,7,0 307) HOST ADAPTOR
> scsibus4:
> 4,0,0 400) 'Generic ' 'USB SM Reader ' '1.02' Removable Disk
> 4,1,0 401) *
> 4,2,0 402) *
> 4,3,0 403) *
> 4,4,0 404) *
> 4,5,0 405) *
> 4,6,0 406) *
> 4,7,0 407) HOST ADAPTOR
> scsibus5:
> 5,0,0 500) 'Generic ' 'USB MS Reader ' '1.03' Removable Disk
> 5,1,0 501) *
> 5,2,0 502) *
> 5,3,0 503) *
> 5,4,0 504) *
> 5,5,0 505) *
> 5,6,0 506) *
> 5,7,0 507) HOST ADAPTOR
CDiagnostics::ProcessEnded
More information about the ubuntu-users
mailing list